HYDRAULIC OILS
HYDRAN HLM ISO 10/15/22/32/46/68/100/150/220
Product Description
Premium quality oil produced from high selected base oils and additive systems, suitable for use in hydraulic and circulating systems in industry and mobile services. This oil offers excellent protection against wear, rust, oxidation and corrosion. It can be used also in air comp-ressors, gear sets, lifts, presses and other circulating oil systems.
Benefits
Superior thermal and oxidation stability
Excellent protection against rust and corrosion
Very good antifoaming and water separation properties
Extended equipment life
Specifications/Approvals
ISO L-HM, DIN 51524 Part 2 HLP, AFNOR NFE 48-603 HL/HM, VICKERS M-2950-S/I-286-S, CINCINNATI MILACRON
HYDRAN HVLP ISO 22/32/46/68/100/150/220
Product Description
Premium quality oil produced from high selected base oils and additive systems.Thanks of high viscosity index this oil is suitable for use in modern hydraulic systems operating under high pressure and circulating systems in industry and mobile services. It offers excellent protection against wear, rust, oxidation and corrosion. It can also be used in hydraulic and power transmissions systems of excavators, cranes and hydrostatic drives.
Benefits
High viscosity index
Excellent corrosion protection
Enhanced thermal and oxidation stability
Air release performance
Extended equipment life
Specifications/Approvals
DIN 51524 Part 2/3 HVLP, AFNOR NFE 48-603 HV, VICKERS M-2950-S/ I-286-S, DENISON HF-0/HF-1/HF-2, CINCINNATI MILACRON
HYDRAN ZF ISO 32/46/68
Product Description
Zinc Free Hydraulic Oils are formulated with a non-zinc ashless additives to provide extended pump life and to give exellent FZG performance in vane and gear pumps requiring anti-wear protection. It offers excellent demulisification properties, anit-wear and rust protection, good resistance to foaming, exellent thermal and oxidation stability. Recommended for equipments with silver bearing surfaces.
Benefits
Zinc free
Excellent demulsification properties
Very good anit-wear and rust protection
Very good resistance to foaming
Exellent thermal and oxidation stability
Specifications/Approvals
DIN 51524 Part 2 HLP, DENISON HF-0 & HF-2, AFNOR NFE 78-690/ 48-691, VICKERS M-2950-S/ I-286-S, CINCINNATI MILACRON P68/ 69/ 70, GM LH-04-1/06-1/15-1, SEB 18122 HLP/ 181286 CLP, BOSCH
HYDRAN FDA ISO 10/13/15
Product Description
High quality oil formulated with extremely refined paraffinic base oils to meet the requirements of Food and Drug administration. It is suitable for use in cosmetic and medicine production.
Benefits
High purity
Good film strength
Exellent oxidation stability
Low and high temperature service
Specifications/Approvals
ISO VG 10/13/15, FDA 21 CFR 172.878/178.3570, CODEX 1998, U.S PHARMACOPEIA
- HYDRAN HLM
-
HYDRAN HLM ISO 10/15/22/32/46/68/100/150/220
Product Description
Premium quality oil produced from high selected base oils and additive systems, suitable for use in hydraulic and circulating systems in industry and mobile services. This oil offers excellent protection against wear, rust, oxidation and corrosion. It can be used also in air comp-ressors, gear sets, lifts, presses and other circulating oil systems.
Benefits
Superior thermal and oxidation stability
Excellent protection against rust and corrosion
Very good antifoaming and water separation properties
Extended equipment life
Specifications/Approvals
ISO L-HM, DIN 51524 Part 2 HLP, AFNOR NFE 48-603 HL/HM, VICKERS M-2950-S/I-286-S, CINCINNATI MILACRON
- HYDRAN HVLP
-
HYDRAN HVLP ISO 22/32/46/68/100/150/220
Product Description
Premium quality oil produced from high selected base oils and additive systems.Thanks of high viscosity index this oil is suitable for use in modern hydraulic systems operating under high pressure and circulating systems in industry and mobile services. It offers excellent protection against wear, rust, oxidation and corrosion. It can also be used in hydraulic and power transmissions systems of excavators, cranes and hydrostatic drives.
Benefits
High viscosity index
Excellent corrosion protection
Enhanced thermal and oxidation stability
Air release performance
Extended equipment life
Specifications/Approvals
DIN 51524 Part 2/3 HVLP, AFNOR NFE 48-603 HV, VICKERS M-2950-S/ I-286-S, DENISON HF-0/HF-1/HF-2, CINCINNATI MILACRON
- HYDRAN ZF
-
HYDRAN ZF ISO 32/46/68
Product Description
Zinc Free Hydraulic Oils are formulated with a non-zinc ashless additives to provide extended pump life and to give exellent FZG performance in vane and gear pumps requiring anti-wear protection. It offers excellent demulisification properties, anit-wear and rust protection, good resistance to foaming, exellent thermal and oxidation stability. Recommended for equipments with silver bearing surfaces.
Benefits
Zinc free
Excellent demulsification properties
Very good anit-wear and rust protection
Very good resistance to foaming
Exellent thermal and oxidation stability
Specifications/Approvals
DIN 51524 Part 2 HLP, DENISON HF-0 & HF-2, AFNOR NFE 78-690/ 48-691, VICKERS M-2950-S/ I-286-S, CINCINNATI MILACRON P68/ 69/ 70, GM LH-04-1/06-1/15-1, SEB 18122 HLP/ 181286 CLP, BOSCH
- HYDRAN FDA
-
HYDRAN FDA ISO 10/13/15
Product Description
High quality oil formulated with extremely refined paraffinic base oils to meet the requirements of Food and Drug administration. It is suitable for use in cosmetic and medicine production.
Benefits
High purity
Good film strength
Exellent oxidation stability
Low and high temperature service
Specifications/Approvals
ISO VG 10/13/15, FDA 21 CFR 172.878/178.3570, CODEX 1998, U.S PHARMACOPEIA
HYDRAULIC OILS
HYDRAN FDA ISO 10/13/15
Product Description
High quality oil formulated with extremely refined paraffinic base oils to meet the requirements of Food and Drug administration. It is suitable for use in cosmetic and medicine production.
Benefits
High purity
Good film strength
Exellent oxidation stability
Low and high temperature service
Specifications/Approvals
ISO VG 10/13/15, FDA 21 CFR 172.878/178.3570, CODEX 1998, U.S PHARMACOPEIA
HYDRAN HLM ISO 10/15/22/32/46/68/100/150/220
Product Description
Premium quality oil produced from high selected base oils and additive systems, suitable for use in hydraulic and circulating systems in industry and mobile services. This oil offers excellent protection against wear, rust, oxidation and corrosion. It can be used also in air comp-ressors, gear sets, lifts, presses and other circulating oil systems.
Benefits
Superior thermal and oxidation stability
Excellent protection against rust and corrosion
Very good antifoaming and water separation properties
Extended equipment life
Specifications/Approvals
ISO L-HM, DIN 51524 Part 2 HLP, AFNOR NFE 48-603 HL/HM, VICKERS M-2950-S/I-286-S, CINCINNATI MILACRON
HYDRAN HVLP ISO 22/32/46/68/100/ 150/220
Product Description
Premium quality oil produced from high selected base oils and additive systems.Thanks of high viscosity index this oil is suitable for use in modern hydraulic systems operating under high pressure and circulating systems in industry and mobile services. It offers excellent protection against wear, rust, oxidation and corrosion. It can also be used in hydraulic and power transmissions systems of excavators, cranes and hydrostatic drives.
Benefits
High viscosity index
Excellent corrosion protection
Enhanced thermal and oxidation stability
Air release performance
Extended equipment life
Specifications/Approvals
DIN 51524 Part 2/3 HVLP, AFNOR NFE 48-603 HV, VICKERS M-2950-S/ I-286-S, DENISON HF-0/HF-1/HF-2, CINCINNATI MILACRON
HYDRAN ZF ISO 32/46/68
Product Description
Zinc Free Hydraulic Oils are formulated with a non-zinc ashless additives to provide extended pump life and to give exellent FZG performance in vane and gear pumps requiring anti-wear protection. It offers excellent demulisification properties, anit-wear and rust protection, good resistance to foaming, exellent thermal and oxidation stability. Recommended for equipments with silver bearing surfaces.
Benefits
Zinc free
Excellent demulsification properties
Very good anit-wear and rust protection
Very good resistance to foaming
Exellent thermal and oxidation stability
Specifications/Approvals
DIN 51524 Part 2 HLP, DENISON HF-0 & HF-2, AFNOR NFE 78-690/ 48-691, VICKERS M-2950-S/ I-286-S, CINCINNATI MILACRON P68/ 69/ 70, GM LH-04-1/06-1/15-1, SEB 18122 HLP/ 181286 CLP, BOSCH
- FDA
-
HYDRAN FDA ISO 10/13/15
Product Description
High quality oil formulated with extremely refined paraffinic base oils to meet the requirements of Food and Drug administration. It is suitable for use in cosmetic and medicine production.
Benefits
High purity
Good film strength
Exellent oxidation stability
Low and high temperature service
Specifications/Approvals
ISO VG 10/13/15, FDA 21 CFR 172.878/178.3570, CODEX 1998, U.S PHARMACOPEIA
- HLM
-
HYDRAN HLM ISO 10/15/22/32/46/68/100/150/220
Product Description
Premium quality oil produced from high selected base oils and additive systems, suitable for use in hydraulic and circulating systems in industry and mobile services. This oil offers excellent protection against wear, rust, oxidation and corrosion. It can be used also in air comp-ressors, gear sets, lifts, presses and other circulating oil systems.
Benefits
Superior thermal and oxidation stability
Excellent protection against rust and corrosion
Very good antifoaming and water separation properties
Extended equipment life
Specifications/Approvals
ISO L-HM, DIN 51524 Part 2 HLP, AFNOR NFE 48-603 HL/HM, VICKERS M-2950-S/I-286-S, CINCINNATI MILACRON
- HVLP
-
HYDRAN HVLP ISO 22/32/46/68/100/ 150/220
Product Description
Premium quality oil produced from high selected base oils and additive systems.Thanks of high viscosity index this oil is suitable for use in modern hydraulic systems operating under high pressure and circulating systems in industry and mobile services. It offers excellent protection against wear, rust, oxidation and corrosion. It can also be used in hydraulic and power transmissions systems of excavators, cranes and hydrostatic drives.
Benefits
High viscosity index
Excellent corrosion protection
Enhanced thermal and oxidation stability
Air release performance
Extended equipment life
Specifications/Approvals
DIN 51524 Part 2/3 HVLP, AFNOR NFE 48-603 HV, VICKERS M-2950-S/ I-286-S, DENISON HF-0/HF-1/HF-2, CINCINNATI MILACRON
- ZF
-
HYDRAN ZF ISO 32/46/68
Product Description
Zinc Free Hydraulic Oils are formulated with a non-zinc ashless additives to provide extended pump life and to give exellent FZG performance in vane and gear pumps requiring anti-wear protection. It offers excellent demulisification properties, anit-wear and rust protection, good resistance to foaming, exellent thermal and oxidation stability. Recommended for equipments with silver bearing surfaces.
Benefits
Zinc free
Excellent demulsification properties
Very good anit-wear and rust protection
Very good resistance to foaming
Exellent thermal and oxidation stability
Specifications/Approvals
DIN 51524 Part 2 HLP, DENISON HF-0 & HF-2, AFNOR NFE 78-690/ 48-691, VICKERS M-2950-S/ I-286-S, CINCINNATI MILACRON P68/ 69/ 70, GM LH-04-1/06-1/15-1, SEB 18122 HLP/ 181286 CLP, BOSCH
INDUSTRIAL GEAR OILS
TITAN EP 68/100/150/220/320/460/680
Product Description
Premium series of oils blended with high quality base oils and with extreme pressure additives, designed for lubrication of industrial gears operating under several conditions requiring extreme pressure performance. It can also be used in spur,helical and bevel gears, industrial bearings and marine gear applications.
Benefits
Superior bearing protection
Extreme pressure properties
Excellent rust and corrosion protection
Long drain interval
Specifications/Approvals
DIN 51517 CLP, AGMA 9005-02, DAVID BROWN S1.53.101, U.S. STEEL 224, SEB 181226, CINCINNATI EP
TITAN UNIVERSAL 150/220/320/460/680
Product Description
Universal industrial gear oils formulated with high quality base oils and selected additives. Suitable for use in industrial gears operating under normal to several conditions . It can also be used in spur,helical and bevel gears, circulating systems of industrial equipment as well as gear boxes,slide guides.
Benefits
Universal use
Effective resistance to high temperatures
Outstanding wear resistance
Very good rust and corrosion protection
Specifications/Approvals
DIN 51517 CLP,AGMA 9005-02,DAVID BROWN S1.53.101,U.S STEEL 224,SEB 181226,CINCINNATI
TITAN PAO 100/150/220/320/460
Product Description
Premium performance industrial gear oils, formulated with high viscosity index synthetic base oil (PAO) enhanced with advanced extreme pressure,anti-oxidant,anti-rust and anti-foam additives. It offers excellent wear properties, outstanding extreme temperature performance for extended component and fluid life. Suitable for enclosed industrial gear drives and bearings operating under normal to severe load conditions and in wide extremes of temperature.
Benefits
Very high viscosity index
Excellent resistance to high pressures and shock loads
Very good resistance to high temperatures
Excellent wear resistance and resistance to foaming
Extended component life
Specifications/Approvals
DIN 51517 Part 3, US Steel 224, AGMA 9005-D94, Cincinnati Milacron, Clean Panel Coker, S-200 Oxidation Tubes
TITAN PG 150/220/320
Product Description
Premium performance industrial gear oils, formulated with poly-alkylene-glycol bases and fortified with advanced anti-oxidant,anti-rust and anti-foam additives. It offers excellent wear properties, outstanding extreme temperature performance for extended component and fluid life. Suitable for highly loaded spur, bevel, planetary and worm gears operating under high thermal load
Benefits
Very high viscosity index
Excellent resistance to high pressures and shock loads
Very good resistance to high temperatures
Excellent wear resistance and resistance to foaming
Extended component life
Specifications/Approvals
DIN 51517 Part 3, DIN 51502 CLP-PG, ANSI/AGMA D 9005-E02
- TITAN EP
-
TITAN EP 68/100/150/220/320/460/680
Product Description
Premium series of oils blended with high quality base oils and with extreme pressure additives, designed for lubrication of industrial gears operating under several conditions requiring extreme pressure performance. It can also be used in spur,helical and bevel gears, industrial bearings and marine gear applications.
Benefits
Superior bearing protection
Extreme pressure properties
Excellent rust and corrosion protection
Long drain interval
Specifications/Approvals
DIN 51517 CLP, AGMA 9005-02, DAVID BROWN S1.53.101, U.S. STEEL 224, SEB 181226, CINCINNATI EP
- TITAN UNIVERSAL
-
TITAN UNIVERSAL 150/220/320/460/680
Product Description
Universal industrial gear oils formulated with high quality base oils and selected additives. Suitable for use in industrial gears operating under normal to several conditions . It can also be used in spur,helical and bevel gears, circulating systems of industrial equipment as well as gear boxes,slide guides.
Benefits
Universal use
Effective resistance to high temperatures
Outstanding wear resistance
Very good rust and corrosion protection
Specifications/Approvals
DIN 51517 CLP,AGMA 9005-02,DAVID BROWN S1.53.101,U.S STEEL 224,SEB 181226,CINCINNATI
- TITAN PAO
-
TITAN PAO 100/150/220/320/460
Product Description
Premium performance industrial gear oils, formulated with high viscosity index synthetic base oil (PAO) enhanced with advanced extreme pressure,anti-oxidant,anti-rust and anti-foam additives. It offers excellent wear properties, outstanding extreme temperature performance for extended component and fluid life. Suitable for enclosed industrial gear drives and bearings operating under normal to severe load conditions and in wide extremes of temperature.
Benefits
Very high viscosity index
Excellent resistance to high pressures and shock loads
Very good resistance to high temperatures
Excellent wear resistance and resistance to foaming
Extended component life
Specifications/Approvals
DIN 51517 Part 3, US Steel 224, AGMA 9005-D94, Cincinnati Milacron, Clean Panel Coker, S-200 Oxidation Tubes
- TITAN PG
-
TITAN PG 150/220/320
Product Description
Premium performance industrial gear oils, formulated with poly-alkylene-glycol bases and fortified with advanced anti-oxidant,anti-rust and anti-foam additives. It offers excellent wear properties, outstanding extreme temperature performance for extended component and fluid life. Suitable for highly loaded spur, bevel, planetary and worm gears operating under high thermal load
Benefits
Very high viscosity index
Excellent resistance to high pressures and shock loads
Very good resistance to high temperatures
Excellent wear resistance and resistance to foaming
Extended component life
Specifications/Approvals
DIN 51517 Part 3, DIN 51502 CLP-PG, ANSI/AGMA D 9005-E02
INDUSTRIAL GEAR OILS
TITAN EP 68/100/150/220/320/460/680
Product Description
Premium series of oils blended with high quality base oils and with extreme pressure additives, designed for lubrication of industrial gears operating under several conditions requiring extreme pressure performance. It can also be used in spur,helical and bevel gears, industrial bearings and marine gear applications.
Benefits
Superior bearing protection
Extreme pressure properties
Excellent rust and corrosion protection
Long drain interval
Specifications/Approvals
DIN 51517 CLP, AGMA 9005-02, DAVID BROWN S1.53.101, U.S. STEEL 224, SEB 181226, CINCINNATI EP
TITAN UNIVERSAL 150/220/320/460/680
Product Description
Universal industrial gear oils formulated with high quality base oils and selected additives. Suitable for use in industrial gears operating under normal to several conditions . It can also be used in spur,helical and bevel gears, circulating systems of industrial equipment as well as gear boxes,slide guides.
Benefits
Universal use
Effective resistance to high temperatures
Outstanding wear resistance
Very good rust and corrosion protection
Specifications/Approvals
DIN 51517 CLP,AGMA 9005-02,DAVID BROWN S1.53.101,U.S STEEL 224,SEB 181226,CINCINNATI
TITAN PAO 100/150/220/320/460
Product Description
Premium performance industrial gear oils, formulated with high viscosity index synthetic base oil (PAO) enhanced with advanced extreme pressure,anti-oxidant,anti-rust and anti-foam additives. It offers excellent wear properties, outstanding extreme temperature performance for extended component and fluid life. Suitable for enclosed industrial gear drives and bearings operating under normal to severe load conditions and in wide extremes of temperature.
Benefits
Very high viscosity index
Excellent resistance to high pressures and shock loads
Very good resistance to high temperatures
Excellent wear resistance and resistance to foaming
Extended component life
Specifications/Approvals
DIN 51517 Part 3, US Steel 224, AGMA 9005-D94, Cincinnati Milacron, Clean Panel Coker, S-200 Oxidation Tubes
TITAN PG 150/220/320
Product Description
Premium performance industrial gear oils, formulated with poly-alkylene-glycol bases and fortified with advanced anti-oxidant,anti-rust and anti-foam additives. It offers excellent wear properties, outstanding extreme temperature performance for extended component and fluid life. Suitable for highly loaded spur, bevel, planetary and worm gears operating under high thermal load
Benefits
Very high viscosity index
Excellent resistance to high pressures and shock loads
Very good resistance to high temperatures
Excellent wear resistance and resistance to foaming
Extended component life
Specifications/Approvals
DIN 51517 Part 3, DIN 51502 CLP-PG, ANSI/AGMA D 9005-E02
- EP
-
TITAN EP 68/100/150/220/320/460/680
Product Description
Premium series of oils blended with high quality base oils and with extreme pressure additives, designed for lubrication of industrial gears operating under several conditions requiring extreme pressure performance. It can also be used in spur,helical and bevel gears, industrial bearings and marine gear applications.
Benefits
Superior bearing protection
Extreme pressure properties
Excellent rust and corrosion protection
Long drain interval
Specifications/Approvals
DIN 51517 CLP, AGMA 9005-02, DAVID BROWN S1.53.101, U.S. STEEL 224, SEB 181226, CINCINNATI EP
- UNIVERSAL
-
TITAN UNIVERSAL 150/220/320/460/680
Product Description
Universal industrial gear oils formulated with high quality base oils and selected additives. Suitable for use in industrial gears operating under normal to several conditions . It can also be used in spur,helical and bevel gears, circulating systems of industrial equipment as well as gear boxes,slide guides.
Benefits
Universal use
Effective resistance to high temperatures
Outstanding wear resistance
Very good rust and corrosion protection
Specifications/Approvals
DIN 51517 CLP,AGMA 9005-02,DAVID BROWN S1.53.101,U.S STEEL 224,SEB 181226,CINCINNATI
- PAO
-
TITAN PAO 100/150/220/320/460
Product Description
Premium performance industrial gear oils, formulated with high viscosity index synthetic base oil (PAO) enhanced with advanced extreme pressure,anti-oxidant,anti-rust and anti-foam additives. It offers excellent wear properties, outstanding extreme temperature performance for extended component and fluid life. Suitable for enclosed industrial gear drives and bearings operating under normal to severe load conditions and in wide extremes of temperature.
Benefits
Very high viscosity index
Excellent resistance to high pressures and shock loads
Very good resistance to high temperatures
Excellent wear resistance and resistance to foaming
Extended component life
Specifications/Approvals
DIN 51517 Part 3, US Steel 224, AGMA 9005-D94, Cincinnati Milacron, Clean Panel Coker, S-200 Oxidation Tubes
- PG
-
TITAN PG 150/220/320
Product Description
Premium performance industrial gear oils, formulated with poly-alkylene-glycol bases and fortified with advanced anti-oxidant,anti-rust and anti-foam additives. It offers excellent wear properties, outstanding extreme temperature performance for extended component and fluid life. Suitable for highly loaded spur, bevel, planetary and worm gears operating under high thermal load
Benefits
Very high viscosity index
Excellent resistance to high pressures and shock loads
Very good resistance to high temperatures
Excellent wear resistance and resistance to foaming
Extended component life
Specifications/Approvals
DIN 51517 Part 3, DIN 51502 CLP-PG, ANSI/AGMA D 9005-E02
COMPRESSOR OILS
COMPRESSOR ISO 32/46/68/100/150
Product Description
Premium quality oil produced from highly refined base oils to meet the requirements of major compressor manufaturers. This oil provides excellent protection against wear, oxidation, foaming and rust. It is suitable for reciprocating and rotary air compressors, van reciprocating or screw type, used in stationary and mobile services.
Benefits
Excellent thermal and oxidation stability
Best wear protection
Very good filterability and demulsibility properties
Extended equipment life
Specifications/Approvals
DIN 51506 VDL, ISO 6743 DAA
COMPRESSOR PAO ISO 32/46/68
Product Description
Fully synthetic compressor oil formulated with high quality PAO base fluids and ashless anti-wear additives. It offers excellent oxidation stability, corrosion, deposit control and low volatility, outstanding demulsifying power as well as excellent air separation ability ensuring extended service life of the equipment. Suitable for rotary screw air compressors and reciprocating compressor crankcases and cylinders, vacuum pumps and other compressor applications
Benefits
Excellent thermal and oxidation stability
High viscosity index
Excellent hydrolytic stability
Extended equipment life
Specifications/Approvals
DIN 51506 VDL
REFRIGER ISO 32/46/68/100
Product Description
High performance oil produced with refined naphthenic base oils. This oil offers very good thermal and oxidation stability, good protection against rust and corrosion, excellent antiwear and low-temperature properties. It is suitable for refrigeration reciprocating or rotary compressors operating with ammonia or halogenated hydrocarbons.
Benefits
Superior thermal and oxidation stability
Excellent protection against rust and corrosion
Minimizes deposit formation
Extended equipment life
Specifications/Approvals
DIN 51503 Part 1 KC/KA, BS 2626
- COMPRESSOR
-
COMPRESSOR ISO 32/46/68/100/150
Product Description
Premium quality oil produced from highly refined base oils to meet the requirements of major compressor manufaturers. This oil provides excellent protection against wear, oxidation, foaming and rust. It is suitable for reciprocating and rotary air compressors, van reciprocating or screw type, used in stationary and mobile services.
Benefits
Excellent thermal and oxidation stability
Best wear protection
Very good filterability and demulsibility properties
Extended equipment life
Specifications/Approvals
DIN 51506 VDL, ISO 6743 DAA
- COMPRESSOR PAO
-
COMPRESSOR PAO ISO 32/46/68
Product Description
Fully synthetic compressor oil formulated with high quality PAO base fluids and ashless anti-wear additives. It offers excellent oxidation stability, corrosion, deposit control and low volatility, outstanding demulsifying power as well as excellent air separation ability ensuring extended service life of the equipment. Suitable for rotary screw air compressors and reciprocating compressor crankcases and cylinders, vacuum pumps and other compressor applications
Benefits
Excellent thermal and oxidation stability
High viscosity index
Excellent hydrolytic stability
Extended equipment life
Specifications/Approvals
DIN 51506 VDL
- REFRIGER
-
REFRIGER ISO 32/46/68/100
Product Description
High performance oil produced with refined naphthenic base oils. This oil offers very good thermal and oxidation stability, good protection against rust and corrosion, excellent antiwear and low-temperature properties. It is suitable for refrigeration reciprocating or rotary compressors operating with ammonia or halogenated hydrocarbons.
Benefits
Superior thermal and oxidation stability
Excellent protection against rust and corrosion
Minimizes deposit formation
Extended equipment life
Specifications/Approvals
DIN 51503 Part 1 KC/KA, BS 2626
COMPRESSOR OILS
COMPRESSOR ISO 32/46/68/100/150
Product Description
Premium quality oil produced from highly refined base oils to meet the requirements of major compressor manufaturers. This oil provides excellent protection against wear, oxidation, foaming and rust. It is suitable for reciprocating and rotary air compressors, van reciprocating or screw type, used in stationary and mobile services.
Benefits
Excellent thermal and oxidation stability
Best wear protection
Very good filterability and demulsibility properties
Extended equipment life
Specifications/Approvals
DIN 51506 VDL, ISO 6743 DAA
COMPRESSOR PAO ISO 32/46/68
Product Description
Fully synthetic compressor oil formulated with high quality PAO base fluids and ashless anti-wear additives. It offers excellent oxidation stability, corrosion, deposit control and low volatility, outstanding demulsifying power as well as excellent air separation ability ensuring extended service life of the equipment. Suitable for rotary screw air compressors and reciprocating compressor crankcases and cylinders, vacuum pumps and other compressor applications
Benefits
Excellent thermal and oxidation stability
High viscosity index
Excellent hydrolytic stability
Extended equipment life
Specifications/Approvals
DIN 51506 VDL
REFRIGER ISO 32/46/68/100
Product Description
High performance oil produced with refined naphthenic base oils. This oil offers very good thermal and oxidation stability, good protection against rust and corrosion, excellent antiwear and low-temperature properties. It is suitable for refrigeration reciprocating or rotary compressors operating with ammonia or halogenated hydrocarbons.
Benefits
Superior thermal and oxidation stability
Excellent protection against rust and corrosion
Minimizes deposit formation
Extended equipment life
Specifications/Approvals
DIN 51503 Part 1 KC/KA, BS 2626
- COMPRESSOR
-
COMPRESSOR ISO 32/46/68/100/150
Product Description
Premium quality oil produced from highly refined base oils to meet the requirements of major compressor manufaturers. This oil provides excellent protection against wear, oxidation, foaming and rust. It is suitable for reciprocating and rotary air compressors, van reciprocating or screw type, used in stationary and mobile services.
Benefits
Excellent thermal and oxidation stability
Best wear protection
Very good filterability and demulsibility properties
Extended equipment life
Specifications/Approvals
DIN 51506 VDL, ISO 6743 DAA
- PAO
-
COMPRESSOR PAO ISO 32/46/68
Product Description
Fully synthetic compressor oil formulated with high quality PAO base fluids and ashless anti-wear additives. It offers excellent oxidation stability, corrosion, deposit control and low volatility, outstanding demulsifying power as well as excellent air separation ability ensuring extended service life of the equipment. Suitable for rotary screw air compressors and reciprocating compressor crankcases and cylinders, vacuum pumps and other compressor applications
Benefits
Excellent thermal and oxidation stability
High viscosity index
Excellent hydrolytic stability
Extended equipment life
Specifications/Approvals
DIN 51506 VDL
- REFRIGER
-
REFRIGER ISO 32/46/68/100
Product Description
High performance oil produced with refined naphthenic base oils. This oil offers very good thermal and oxidation stability, good protection against rust and corrosion, excellent antiwear and low-temperature properties. It is suitable for refrigeration reciprocating or rotary compressors operating with ammonia or halogenated hydrocarbons.
Benefits
Superior thermal and oxidation stability
Excellent protection against rust and corrosion
Minimizes deposit formation
Extended equipment life
Specifications/Approvals
DIN 51503 Part 1 KC/KA, BS 2626
TURBINE OIL
TURBINE OIL ISO 46
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489 ,ASTM D-4303 TYPE III / 4304 TYPI I
TURBINE OIL ISO 68
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489, ASTM D-4303 TYPE III / 4304 TYPI I
TURBINE OIL ISO 100
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489, ASTM D-4303 TYPE III / 4304 TYPI I
- TURBINE OIL ISO 46
-
TURBINE OIL ISO 46
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489 ,ASTM D-4303 TYPE III / 4304 TYPI I
- TURBINE OIL ISO 68
-
TURBINE OIL ISO 68
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489, ASTM D-4303 TYPE III / 4304 TYPI I
- TURBINE OIL ISO 100
-
TURBINE OIL ISO 100
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489, ASTM D-4303 TYPE III / 4304 TYPI I
TURBINE OIL
TURBINE OIL ISO 46
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489 ,ASTM D-4303 TYPE III / 4304 TYPI I
TURBINE OIL ISO 68
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489, ASTM D-4303 TYPE III / 4304 TYPI I
TURBINE OIL ISO 100
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489, ASTM D-4303 TYPE III / 4304 TYPI I
- ISO 46
-
TURBINE OIL ISO 46
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489 ,ASTM D-4303 TYPE III / 4304 TYPI I
- ISO 68
-
TURBINE OIL ISO 68
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489, ASTM D-4303 TYPE III / 4304 TYPI I
- ISO 100
-
TURBINE OIL ISO 100
Products
Premium quality oil from high selected base oils and additive package designed for lubrication of gas,steam and hydraulic turbines. It offers excellent thermal and oxidation stability as well as longer protection against rust,foam and coroorsion. It can also used in circulating systems requiring R&O oils.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
DIN 51515 PART 1/2, General Electric GEK 32568 F, ALSTOM HTGD 90117, Solar Turbines ES 9-224, ISO 8068 TGB TGSB, ISO 11158 HH/HL, SIEMENS AG TLV 9013 05/04 BRITISH STANDARD BS 489, ASTM D-4303 TYPE III / 4304 TYPI I
ROCK DRILL OILS
ROCK DRILL ISO 46
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
ROCK DRILL ISO 68
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
ROCK DRILL ISO 100
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
- RD ISO 46
-
ROCK DRILL ISO 46
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
- RD ISO 68
-
ROCK DRILL ISO 68
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
- RD ISO 100
-
ROCK DRILL ISO 100
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
ROCK DRILL OILS
ROCK DRILL ISO 46
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
ROCK DRILL ISO 68
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
ROCK DRILL ISO 100
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
- ISO 46
-
ROCK DRILL ISO 46
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
- ISO 68
-
ROCK DRILL ISO 68
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
- ISO 100
-
ROCK DRILL ISO 100
Product Description
Premium quality oil designed for lubrication of pneumatic equipment. This oil provides excellent stability and protection against wear, rust and corrosion. It is suitable for pneumatically operated Rock Drills, Hammers and other industrial pneumatic equipments used in mining and construction.
Benefits
Excellent thermal and oxidation stability
Very good water separation capability
Good air release properties
Extended equipment life
Specifications/Approvals
ISO 6743-11
OTHERS
SLIDEWAY ISO 46/68
Product Description
Premium performance oil , formulated from high quality base oil and special additives for the lubrication of both metal and plastic slideways. The performance additives provide outstanding resistance to oxidation, corrosion and wear,excellent adhesive and friction characteristics and eliminating“stick slip” and judder that sometimes occurs in mechanically and hydraulically operated machine tools. Suitable for lubrication of slideways of industrial machines like lathes, grinding machines, milling machines and cutting machines. It can also be used in hydraulic systems, as a chain oil in circulating lubrication systems and for the lubrication of conveyor belts
Benefits
Excellent anti-stick-slip performance
Very good protection against rust and corrosion
Excellent coolant-separating properties
Extended equipment life
Specifications/Approvals
DIN 51502 CGLP, ISO11158HG
TERM OIL T-32
Product Description
Premium quality heat transfer oil formulated to provide excellent resistance against thermal cracking. This oil is suitable to use in closed indirect heating and cooling systems operating in temperatures between 10°C and 315°C.
Benefits
Excellent thermal cracking resistance
Very good oxidation stability
Excellent rust and corrosion protection
Easy pumping and circulation
Long life service
Specifications/Approvals
ISO 6743-12 , DIN 51522-Q
ENERGY
Product Description
Premium quality oil blended with highly refined naphtenic bases to meet the requirements of transformer manufacturers. This oil provides improved electrical properties and good gas absorving properties. It is suitable for all transformers and switch gears.
Benefits
Excellent electrical properties
Low viscosity
High oxidation resistance
Specifications/Approvals
IEC 296 CLASS 1A, BS 148 CLASS 1, ASTM D 3487 Type 2
EMULSION
Product Description
Premium general purpose emulsifying metal working lubricant from refined bases and selected systems of emulsifiers. This oil is recommended for all machining operations as stamping, turning, planning, cutting, grinding, shaping etc. The emulsion is obtained adding the product in the water according to the hardness and the type of the work process.
Benefits
Very good corrosion and rust protection
Excellent antibacterial properties
Good dilution stability
Specifications/Approvals
–
MS
Product Description
Special lubricant from selected base oils and fortified with special additives. It is suitable for all seasons lubrication of mechanical or automatic link chains of motorcycles, chainsaws, farm equipment and other industrial machinery.
Benefits
Very good lubrication and antiwear properties
Lower sulphated ash
Prevent spark plug fouling
Excellent detergency propertie
Specifications/Approvals
–
- SLIDEWAY
-
SLIDEWAY ISO 46/68
Product Description
Premium performance oil , formulated from high quality base oil and special additives for the lubrication of both metal and plastic slideways. The performance additives provide outstanding resistance to oxidation, corrosion and wear,excellent adhesive and friction characteristics and eliminating“stick slip” and judder that sometimes occurs in mechanically and hydraulically operated machine tools. Suitable for lubrication of slideways of industrial machines like lathes, grinding machines, milling machines and cutting machines. It can also be used in hydraulic systems, as a chain oil in circulating lubrication systems and for the lubrication of conveyor belts
Benefits
Excellent anti-stick-slip performance
Very good protection against rust and corrosion
Excellent coolant-separating properties
Extended equipment life
Specifications/Approvals
DIN 51502 CGLP, ISO11158HG
- TERM OIL
-
TERM OIL T-32
Product Description
Premium quality heat transfer oil formulated to provide excellent resistance against thermal cracking. This oil is suitable to use in closed indirect heating and cooling systems operating in temperatures between 10°C and 315°C.
Benefits
Excellent thermal cracking resistance
Very good oxidation stability
Excellent rust and corrosion protection
Easy pumping and circulation
Long life service
Specifications/Approvals
ISO 6743-12 , DIN 51522-Q
- ENERGY
-
ENERGY
Product Description
Premium quality oil blended with highly refined naphtenic bases to meet the requirements of transformer manufacturers. This oil provides improved electrical properties and good gas absorving properties. It is suitable for all transformers and switch gears.
Benefits
Excellent electrical properties
Low viscosity
High oxidation resistance
Specifications/Approvals
IEC 296 CLASS 1A, BS 148 CLASS 1, ASTM D 3487 Type 2
- EMULSION
-
EMULSION
Product Description
Premium general purpose emulsifying metal working lubricant from refined bases and selected systems of emulsifiers. This oil is recommended for all machining operations as stamping, turning, planning, cutting, grinding, shaping etc. The emulsion is obtained adding the product in the water according to the hardness and the type of the work process.
Benefits
Very good corrosion and rust protection
Excellent antibacterial properties
Good dilution stability
Specifications/Approvals
–
- MS
-
MS
Product Description
Special lubricant from selected base oils and fortified with special additives. It is suitable for all seasons lubrication of mechanical or automatic link chains of motorcycles, chainsaws, farm equipment and other industrial machinery.
Benefits
Very good lubrication and antiwear properties
Lower sulphated ash
Prevent spark plug fouling
Excellent detergency propertie
Specifications/Approvals
–
OTHERS
SLIDEWAY ISO 46/68
Product Description
Premium performance oil , formulated from high quality base oil and special additives for the lubrication of both metal and plastic slideways. The performance additives provide outstanding resistance to oxidation, corrosion and wear,excellent adhesive and friction characteristics and eliminating“stick slip” and judder that sometimes occurs in mechanically and hydraulically operated machine tools. Suitable for lubrication of slideways of industrial machines like lathes, grinding machines, milling machines and cutting machines. It can also be used in hydraulic systems, as a chain oil in circulating lubrication systems and for the lubrication of conveyor belts
Benefits
Excellent anti-stick-slip performance
Very good protection against rust and corrosion
Excellent coolant-separating properties
Extended equipment life
Specifications/Approvals
DIN 51502 CGLP, ISO11158HG
TERM OIL T-32
Product Description
Premium quality heat transfer oil formulated to provide excellent resistance against thermal cracking. This oil is suitable to use in closed indirect heating and cooling systems operating in temperatures between 10°C and 315°C.
Benefits
Excellent thermal cracking resistance
Very good oxidation stability
Excellent rust and corrosion protection
Easy pumping and circulation
Long life service
Specifications/Approvals
ISO 6743-12 , DIN 51522-Q
ENERGY
Product Description
Premium quality oil blended with highly refined naphtenic bases to meet the requirements of transformer manufacturers. This oil provides improved electrical properties and good gas absorving properties. It is suitable for all transformers and switch gears.
Benefits
Excellent electrical properties
Low viscosity
High oxidation resistance
Specifications/Approvals
IEC 296 CLASS 1A, BS 148 CLASS 1, ASTM D 3487 Type 2
EMULSION
Product Description
Premium general purpose emulsifying metal working lubricant from refined bases and selected systems of emulsifiers. This oil is recommended for all machining operations as stamping, turning, planning, cutting, grinding, shaping etc. The emulsion is obtained adding the product in the water according to the hardness and the type of the work process.